Git is a distributed version control system for software source code and other files. Using version management makes it possible to track changes made to files. It facilitates collaboration between multiple people on a project because concurrent changes cannot lead to accidental overwriting of files, hence preventing information loss. Changes made by multiple people can be merged using the Git software. Versioning of files is often used in software development, but it is also suitable for working on scientific texts such as graduation and doctoral theses that are often written using the LaTeX document preparation software.
With GitLab, LRZ offers a web-based service for managing Git repositories. In addition to the actual repositories where the files are stored, GitLab provides tools such as wikis and an issue tracker. With "Merge Requests", code reviews can be carried out collaboratively and transparently.
Below you will find an overview of the LRZ GitLab installation. Further information can be found in the GitLab-FAQ.
Table of Contents
LRZ GitLab was upgraded to version 15.5 and the processing power of the application servers increased.
LRZ GitLab was upgraded to version 15.4.
LRZ GitLab was updated to the most recent patchlevel of version 15.3. Due to technical issues noticed during preparation and testing we decided to postpone the installation of version 15.4. to a later date.
LRZ GitLab was upgraded to version 15.3.
A Container Registry cleanup task was executed to delete old unused Docker containers. Between Thu 4.8. at 4 pm and Fri 5.8. at 6 pm access to the registry was read-only. Other features of the GitLab service could be used normally.
LRZ GitLab was upgraded to version 15.2.
LRZ GitLab was upgraded to version 15.1.1.
The operating systems of the LRZ GitLab Servers were upgraded and the most recent security patches of GitLab Version 14.10 installed.
LRZ GitLab was upgraded to version 14.10.
LRZ GitLab was upgraded to version 14.9. Related to a vulnerability (which is now fixed, see GitLab Release Information for more information) the internal randomized passwords were reset for all user accounts created after 3.2.2022 until today. The actual user passwords in LDAP were not changed. The affected users can log in normally and don't need to take any action. However, they will receive an E-Mail notification of the password change, which can in this case be ignored.
We have detected no evidence suggesting that this vulnerability would have been exploited. Resetting the passwords is a preventive measure.
LRZ GitLab was upgraded to version 14.8. Users who are operating CI runners are recommended to upgrade those as well. Please note:
The GitInvited service was moved to a new server. There is no change in the functionality from the user point of view.
LRZ GitLab was upgraded to the most recent patchlevel of version 14.7.
LRZ GitLab was upgraded to version 14.7.
Currently job artifacts in CI/CD pipelines on LRZ GitLab never expire. Starting from Wed 26.1.2022 the default expiration time will be 30 days (GitLab default). Currently existing artifacts in already completed jobs will not be affected by the change. The latest artifacts for all jobs in the latest successful pipelines will be kept (also when they are older than 30 days).
|14.01.2022||LRZ GitLab was upgraded to the most recent patchlevel of version 14.6.|
|07.01.2022||LRZ GitLab was upgraded to version 14.6.|
Terms of service
All members of TUM, LMU and other Munich universities are entitled to use the LRZ GitLab service. This requires a user ID from LRZ or one of the participating universities.
Please note that LRZ GitLab can only be used for instructional-use or non-commercial academic research. IT professional use and/or use for institutional administration is not permitted under the educational license. Detailed information on the GitLab site:
You don't need to register as person or entity in the Education Program on the GitLab website. That has already been done by LRZ on behalf of the participating universities.
Since Git is designed for versioning of text files (source code and other files in text format), Git repositories should remain relatively small (< 1 GB).
For binary formats such as image archives, Microsoft Office files (.doc, .docx, .xls, .xlsx etc.), LibreOffice / OpenOffice files (.odt, .ods etc.) or very dynamic data, GitLab supports the extension Large File Storage (LFS). If you have binary files in your project, please install and activate LFS from the beginning. A later migration of the files under LFS is much more complicated.
The limits in the LRZ GitLab are currently:
- Maximum file size for upload: 2 GB
- Maximum size of the repository including LFS files: 10 GB
The size of the repository can be found at the top of the project page in GitLab (value "X MB Files") . The value "Storage" shows the total size of the project including artifacts which are allowed to exceed the limit. Please note that the values are cached and may therefore not immediately reflect the actual size shortly after changes in the repository are made.
The maximum size of the repository can be increased by the administrators for individual projects if necessary. Proper use of Git LFS is a prerequisite for this. Please contact the LRZ Servicedesk.
In order to ensure stable operation, we will introduce an automatic storage space limitation (quota) in January 2021. New projects can thereafter no longer exceed the set limit. For existing larger projects where LFS is properly configured, we will automatically set a higher limit before enforcing the quota. Owners of oversized projects without LFS will be contacted and asked to reduce the size of their repositories. Instructions for this can be found in the GitLab-FAQ.
10 personal projects may be created at most. This limit can be raised in justified cases. Please contact the LRZ Servicedesk. As an alternative, please organize your projects in groups (see below).
For logically related projects, the use of GitLab groups is recommended. Within a GitLab group, the number of projects is not limited. A group also has the advantage that rights management usually becomes easier and clearer. In addition, the role of a user of a group is inherited to all projects in the group.
Project and group visibility
There are three levels of visibility for projects and groups in LRZ GitLab:
|Visibility||Meaning / Impact|
Details about the levels of visibility as well as roles and rights can be found in the following GitLab articles:
- Over 100,000 people can log into the LRZ GitLab! This includes all persons who belong to the LMU, TUM and also some other Munich universities and scientific institutions.
- With such a large number of authorized persons, it may happen that one or more user IDs are compromised and unauthorized persons (criminals, etc.) use these IDs. These unauthorized persons then also have read access to all projects and groups with the visibility "Internal".
- LRZ GitLab can be accessed from anywhere in the world. There are no geographical or other restrictions.
Conclusion: For your own protection, consider the "Internal" visibility almost like "Public".
It is possible to publish projects so that they can be cloned without logging in. The required setting for the project can only be made by the GitLab administrators. Please pass on the project name or path with a corresponding message to the LRZ Servicedesk and use the button "Selfservice" to make an authenticated request.
We recommend grouping all public projects into groups so that they are not dependent on personal GitLab identifiers. If a project is to be publicly visible, the group which the project belongs to must also be made public.
For public projects, the following information is publicly visible (generally accessible):
- On every commit: The name and email address stored in the Git configuration
- The GitLab username as defined in the User Settings in the Account section. For personal projects, the username is visible in the path of the project.
Until January 2020 the GitLab username was initialized at first login with the user's own user ID, which is assigned by their own institution (LMU, TUM, HM, HSWT). We ask all these members of public projects to change their GitLab username (Settings → Account → Change Username), so that the user ID will not become generally visible. Reasons in detail:
- For privacy reasons, the LRZ must treat the user ID as confidential information.
- The user ID can be used in a social engineering attack in order to build confidence in the victim: << Dear customer with the identifier Abcxyz >>
- There are several variants of password attacks. In the "Online Attack" scenario the attacker attempts to gain access using the normal log procedure. However, the attacker must know or guess both the user ID and the associated password.
When the GitLab username is changed, GitLab automatically adjusts the web addresses and repository URLs of the user's personal projects accordingly. For projects that belong to a group, nothing changes because there is no username in those URLs. Further details on changing your own GitLab username can be found in the GitLab documentation.
Continuous Integration / Continuous Delivery (CI/CD)
The CI/CD integration can be activated at the project level (Settings → General → Permissions → Pipelines). However, you can only configure the communication with a CI runner. LRZ does not provide shared CI runners until further notice, which means you will have to set up and operate a CI runner yourself.
See the following GitLab documentation for more details:
The GitLab Pages feature makes it possible to create and publish static web pages directly from a repository. All LRZ GitLab Pages are served as subdomains under
pages.gitlab.lrz.de. All LRZ GitLab Pages can be reached using a secure connection (HTTPS).
By default, a new GitLab Page is accessible only to project members who are logged in. However, the Page can also be made generally accessible (Settings → General → Pages access control → Everyone).
A CI runner is required for the Pages functionality (see the CI/CD section above).
The GitLab Pages documentation presents the Pages functionality in detail. There you will find for example a detailed description about how the address of your GitLab Page is formed. (The documentation uses
example.io as an example domain which corresponds to
pages.gitlab.lrz.de on the LRZ GitLab platform.) Please note that the contents of your Pages site must be placed in the directory
public in your repository.
The size of Pages sites is limited to 1 GB. This limit can be raised in justified cases. Please contact the LRZ Servicedesk.