System Status (see also: Access and Overview of HPC Systems)
= fully operational
Status colour Green
= operational with restrictions (see messages below)
Status colour Yellow
= not available
Status colour Red
|login nodes: skx.supermuc.lrz.de|
|archive nodes: skx-arch.supermuc.lrz.de|
|Globus Online File Transfer:|
|Detailed node status|
Add new user? click here
Add new IP? click here
|serial partitions: serial|
|parallel partitions cm2_(std,large)|
|interactive partition: cm2_inter|
parallel partition: mpp3_batch
interactive partition: mpp3_inter
|teramem, ivymuc, kcs|
Compute Cloud and
Compute Cloud: (https://cc.lrz.de)
detailed status and free slots: https://cc.lrz.de/lrz
|LRZ AI System (LRZ AI Systems)|
RStudio Server (https://www.rstudio.lrz.de)
|Messages for SuperMUC-NG|
On July 21 and 22, 2021, the control facilities for the cooling infrastructure of the SuperMUC-NG system will be tested and reviewed.
This must be done while the system is fully loaded. There is, unfortunately, a risk of failure, in which case a system shutdown and reboot may be required.
We will keep you updated via https://www.lrz.de/aktuell/ali00913.html in case the risk materializes.
The new ANSYS Release 2021.R2 has been installed and rolled out on SuperMUC-NG. The modules for ANSYS Release 2021.R2 have been set as the default version.
The system maintenance including update of the OS to SLES 15 is concluded.
Most of the software stack is working as expected, exept for a few known issues. Please check this link "Open issues after the SuperMUC-NG Upgrade to SLES15 (24.06.2021)" first to see whether we are already working on a problem you are observing.
|Messages for Linux Cluster|
CoolMUC-3 maintenance on August 9 and 10,2021.
Due to a scheduled OS upgrade, CoolMUC-3 and some associated housed cluster segments will be unavailable for user operation starting on August 09 at 8:00 am.
The interruption is expected to take until the afternoon of August 10. The login nodes lxlogin8 and lxlogin9 as well as the following SLURM queues are impacted by this interruption:
The new ANSYS Release 2021.R2 has been installed and rolled out on all Linux Cluster systems and RVS. The modules for ANSYS Release 2021.R2 have been set as the default version.
Due to the very limited use of MSC products or MSC Licenses on High-Performance Systems at LRZ, the MSC software support including installations and license server will be taken off by September 2021. Please do write us a ticket if you want to communicate on this matter with a subject MSC via https://servicedesk.lrz.de/.
|Messages for Cloud and other HPC Systems|